The bargain yarn pack looks irresistible until you realise your project needs a little more than one pack. Add another pack, delivery and a different fibre blend, and the cheapest-looking option may no longer be the right one.
A better Ice Yarns purchase starts with the pattern and ends with the delivered cost of enough suitable yarn. This guide uses official listings checked on September 13, 2026 and original worked examples. We have not knitted or crocheted test samples of the yarns discussed. CouponVerdict may earn a commission through affiliate links.
Browse Ice Yarns offers on CouponVerdict
Read the pattern before the offer
Write down the required yarn weight, fibre guidance, length, gauge and number of colours. Keep metres with metres or yards with yards throughout the calculation. A 50g ball does not tell you how much length it contains, and two yarns of the same weight can behave differently.
Compare the candidate yarn with the project's requirements before comparing the price. For a garment, drape and gauge matter; for a multi-colour project, enough stock in every required colour matters. A bargain in the wrong specification can become an unused item in your stash.
Separate a ball from a pack
Ice Yarns listings identify the number of balls in each package. That quantity varies between products and sometimes between options, so a pack is not a standard unit.
As an example, the Summertime listing checked for this article states six 50g balls per pack and 125m per ball, with an 80% cotton and 20% viscose blend. That gives 750m and 300g per pack. These are calculations from the listed specification, not measured sample results.
Another Ice Yarns listing, Etamin, describes ten 30g balls with 180m per ball. The much larger total length does not make it a direct substitute: its listed yarn weight and fibre differ. Compare suitability first.
Turn the pattern into a pack calculation
Suppose your pattern requires 900m of a suitable yarn and a pack contains 750m. One pack is short. Two packs provide 1,500m, leaving 600m before allowing for your actual gauge or any changes to the pattern.
That leftover is not automatically waste. You might already have a useful plan for it. But it belongs in the purchasing decision because you must pay for the second pack to finish the first project.
| Calculation | Example |
|---|---|
| Length per pack | 6 balls × 125m = 750m |
| Packs needed for a 900m requirement | Round 900 ÷ 750 up to 2 packs |
| Total purchased | 2 × 750m = 1,500m |
| Length beyond the stated requirement | 1,500m − 900m = 600m |
The project requirement here is hypothetical. Make a gauge sample and follow the pattern's own allowances before committing to the final quantity.
Compare delivered cost, not the smallest headline
Use the same destination and currency for both alternatives. Include the number of packs needed, delivery and any charges shown for your order. Ice Yarns calculates shipping at checkout, so the product price alone is not the delivered price.
For an illustrative comparison, imagine two packs cost 24 and delivery adds 12. Your project purchase costs 36. Another suitable option costing 32 with delivery included could be cheaper overall, even if its price per ball looks higher. These numbers are examples, not current shipping quotes.
Cost per 100m can help compare yarns of similar specification. Cost for enough yarn to complete the project is the more useful figure when pack sizes differ.
Inspect outlet options carefully
The Ice Yarns Store page on CouponVerdict brings together listed offers and ways to save. When opening an outlet listing, check the selected colour, package quantity and current price. An outlet collection can contain items that are not individually reduced.
For a colour-sensitive project, check the colour reference and dye-lot information where supplied. Product photography is a guide, not a guarantee of an exact screen-to-yarn colour match. If consistency is essential, ask about the batch before purchasing separately at different times.
A useful checkout note
Keep the yarn name, colour code, fibre blend, metres per ball, balls per pack and ordered pack count together. This makes it easier to check the delivery and identify the correct item if you later need support or more yarn.
Common questions
Does buying more always reduce the project cost?
No. More packs may improve the unit price while increasing total spend. Compare the amount needed for the project and a realistic use for any extra yarn.
Can I replace a yarn using weight alone?
No. Fibre, length, construction and gauge also matter. Use the pattern and a sample to assess the substitution.
Sources
Ice Yarns Summertime specification, Etamin specification and shipping and product terms, checked September 13, 2026. Pricing examples are illustrative; confirm live stock and delivery charges for your own basket.
